Thursday, November 25, 2010

How to change destination folder to install avira premium security suite 10?

it will automatically placed to program filesHow to change destination folder to install avira premium security suite 10?Hi



I don't have used this antivirus software yet, so I am talking with reference to other programs I used.



When you run the Setup Program to install this software, on the %26quot;Choose a Destination to Install the Program%26quot; page, select a location by clicking the Browse button there to install the program on it.



* * * * *

Vikas: vikas.jnpt@yahoo.in

* * * * *
  • baby name combo
  • cope with divorce
  • I have an HP printer that is connected to both of my computers. When I install a new printer I want to change?

    to change it so that one printer is one each computer. Can I uninstall the printer only from the one computer that I am going to add the new printer to and then install the new printer to the one computer only?I have an HP printer that is connected to both of my computers. When I install a new printer I want to change?Yes! That's good idea.



    1. Identify the best matching computer for your old printer.



    2. Un-install the old printer driver from your UNMATCHING computer and connect the new printer in it.



    3. Install the new printer driver in the computer mentioned in Step 2.



    Done!

    Do i have to change/install anything to use wireless N on my system?

    i use a dell labtop and a PS3 - there is a wireless card on pc. I am going to use Linksys new router model ???160Do i have to change/install anything to use wireless N on my system?no

    I have a 1997 pontiac grand prix gtp if i install a cold airintake syaytem do i have to change parts so engine?

    I have a 1997 pontiac grand prix gtp if i install a cold airintake syaytem do i have to change parts the check engine light does not come on? will the cars computer mind having a cold air intake syatem?I have a 1997 pontiac grand prix gtp if i install a cold airintake syaytem do i have to change parts so engine?just make sure the mass airflow sensor is still hooked into the new intake system.

    Will I need to re-install Windows if I replace change my motherboard and processor?

    I have a new motherboard and processor that I want to install, but I really don't have time to re-install Windows and get all my settings back to how I like them. Will this be necessary if I install the new hardware, or will my old Windows installation continue to work?Will I need to re-install Windows if I replace change my motherboard and processor?I would recommend it cause window will configure it self different an your board needs different driversWill I need to re-install Windows if I replace change my motherboard and processor?Maybe cause Windows will not like the new hardware I bet.Will I need to re-install Windows if I replace change my motherboard and processor?YesWill I need to re-install Windows if I replace change my motherboard and processor?Vista does work, builds new driver etc. no re-install needed. not sure about XP.Will I need to re-install Windows if I replace change my motherboard and processor?I am sorry to say but yes you have to format your systemWill I need to re-install Windows if I replace change my motherboard and processor?No everything is on your hard drive.Will I need to re-install Windows if I replace change my motherboard and processor?No its not necessary

    but you will have two drivers for one hardware on your system and it can make your system bulky and slow and so best thing is re-installing windowsWill I need to re-install Windows if I replace change my motherboard and processor?You can usually get away with it.

    But if you really,relay need the PC, the gremlins in there will thwart you, and crash the PC.Will I need to re-install Windows if I replace change my motherboard and processor?Not always.

    Your new motherboard will almost certainly have different chipset(s) than the one it is replacing, especially if it has an onboard video chip that provides the video instead of a dedicated graphics card, and which has its own chipset. A Windows XP installation that uses the chipset drivers for the old motherboard is likely to lock up when you run it on the new motherboard.



    Note that RAM and the processor do not have device drivers, so you don't have to do anything to Windows XP if you upgrade those components. Windows will automatically detect and install those devices.



    The most successful process involves having to perform a repair installation of Windows XP, which requires a full Windows XP CD, or at least a recovery partition that includes a repair option.

    Is there a Program that I can download or install that will automatically change my background screen on my PC?

    Vista? If you understand what I'm typing. I have over 200 pictures and wallpapers stored in the %26quot;Pictures%26quot; folder. I like to change them ever so often but I remember my dad's computer used to have a new one everyday. In which he claims he forget how to set it or something. So please help.Is there a Program that I can download or install that will automatically change my background screen on my PC?Webshots Desktop 2009 (Automatically changes your wallpaper)



    Webshots Desktop is a free photo management application that combines wallpaper and screensaver functionality with tools for managing and sharing your own personal photos.



    The latest version makes managing all your photos much easier right from your desktop software. Now you can drag-and-drop photos to Webshots from Windows, search your Webshots collection, and update your albums in a flash.Webshots Desktop is a software that allows you to manage your photos.



    Link download: http://rapidshare.com/files/238067583/we…



    ________________



    Or you can try this one: “Desktop Wallpaper Timer”

    Link download: http://www.pamo-software.com/download/DW…Is there a Program that I can download or install that will automatically change my background screen on my PC?Try John’s Background Switcher (JBS)

    Download it for free

    http://www.johnsadventures.com/software/…
  • hair extension
  • gives out fashion advice
  • How to change the local port number in ror as 3000 from 8080? and also how to install Fishglass gem server?

    I have installed netbeans ide and ruby on rails, in my system. i tried to develop some weblogs after finishing everything, if i execute it - that page was displaying like 404 Page Not Found. Can u anyone please tell me how to change the local port id from 8080 to 3000. and also need to know how to install fishglass gem v3 on netbeans

    How much should it cost for a plumber to change a toilet and install a water shut-off valve?

    It depends on where you live. I would guess they would charge at least $75.00 per hour, 3 hour minimum for travel time.How much should it cost for a plumber to change a toilet and install a water shut-off valve?Thank You



    God Bless

    Report Abuse

    How much should it cost for a plumber to change a toilet and install a water shut-off valve?I agree with Frank. You also need to consider material costs. It is not a hard job to do it yourself. Probably a couple hours for a novice plus the cost of the toilet, wax seal and valve.

    What do i need to change to install a 305 chevy in my 93 jeep wrangler??

    i need to know everthing and anything. please, and thank youWhat do i need to change to install a 305 chevy in my 93 jeep wrangler??Well you need new motor mounts which should be welded to your frame, new transmission or adapter and alot of patience.What do i need to change to install a 305 chevy in my 93 jeep wrangler??This should help

    Good luck.

    If you have the 4 liter, consider the stroker conversion. Much easier! Your rear axle unless Dana 44 will not stand this much power.

    http://forums.fourwheeler.com/70/6442723

    http://www.jpmagazine.com/featuredvehicl

    http://answers.yahoo.com/question/index?

    Why do you need to change a sata2 hard drive to IDE mode to install windows XP?

    I tried to install XP when I left the sata mode as raid but nothing happened and it asked me if i wanted to boot from vista or nothing=(. I changed the settings to make the computer recognize sata as IDE and it worked=). I'm wondering why this happens.Why do you need to change a sata2 hard drive to IDE mode to install windows XP?If you want to install XP on a RAID array, you have to press F6 when the setup program prompts you, then load the RAID drivers.



    This applies to both IDE and SATA RAID setups.Why do you need to change a sata2 hard drive to IDE mode to install windows XP?Hey Lon Z so how u get ur computer to recognixe the sata hd as an ide hd?

    Report Abuse

    What all do you have to change in order to install a 99-04 Lightning engine into a 99-04 mustang?

    My new project I'm wanting to build. Keeping the stock lightning supercharger and all to start with. It's all still in the making, so any advice will help.What all do you have to change in order to install a 99-04 Lightning engine into a 99-04 mustang?I dont think this would be too difficult. They are simular engines. The only difference really is the size, the mustang is 4.6L and the lightning is 5.4L. I think the most difficult part will be to get it to fit. I think that a cowl hood will be an absolute must. Hopefully you wont have to remove your ac or anything like that. With the engine being 5.4L and the way that the eaton roots supercharger has to sit on top of the engine, it should be a pretty tight fit. I am curious to find out though, if you find out the for sure answer to your question please shoot me an email or post the answer. I would really like to find out. By the way, huge props on your project. I think that is one bad @#$ idea and will be one bad #$@ mustang.What all do you have to change in order to install a 99-04 Lightning engine into a 99-04 mustang?Not much if i remember correctly Ive seen the engine swap before. I do believe the 5.4 is taller so a dome style hood is necessary. I saw the swap on 5.0 mustang I'm sure u could get a reprint of that issueWhat all do you have to change in order to install a 99-04 Lightning engine into a 99-04 mustang?you need a three in cowl hood, ecu and all the parts on the motor, i believe you can use the transmission though.
  • rodents
  • Bedding Set
  • If i want to install an new operating system using a disc, what BIOS setting do i have to change it to?

    If i want to install a new operating system using a disc, what BIOS setting do i have to change it to?



    thanks in advance.If i want to install an new operating system using a disc, what BIOS setting do i have to change it to?Change the boot order so that your cd/dvd drive is set as the first boot device.If i want to install an new operating system using a disc, what BIOS setting do i have to change it to?find boot menu ,boot order, or boot priority and set the cd-drive to the first one and then just leave the disk in the drive.

    Change the location to install microsoft office 2007?

    i have an eee pc 901 xp. i tried to install in the d disk , but i dont know how to change the location. it only install in c disk.Change the location to install microsoft office 2007?1. Open any Office application like Microsoft Word and click on Office ORB at top



    2. Now click on %26quot;Word Options%26quot; button. It'll open Options window. Click on %26quot;Save%26quot; tab and in right-side pane, you can change the %26quot;Default file location%26quot; by simply typing the exact path or by selecting the desired drive/folder using Browse button:

    I want to install Adobe flash player at work but it wont let me..what settings do i need to change to install?

    Can someone please help.I want to install Adobe flash player at work but it wont let me..what settings do i need to change to install?It's likely that only the administrator will be able to install software on the computer. If you have an IT Team or someone that maintains the computers at work ask them.

    Install Ubuntu without any change to my computer?

    Can i Install Ubuntu without any change to my computer if i am running Vista and also will it work if i decide to do a complete install?

    ______________________________________?br>
    ACER Aspire 5610Z Laptop,1.5GB RAM,100GB HD,802.11A/B/G Wireless,DVD Burner,I bought at WAL*MART last Febuary?Install Ubuntu without any change to my computer?try a live boot cd. Download ubuntu and then burn it to a cd. It should give you an option to run without installing. this shouldn't leave any files on your computer. From that you can determine if it runs well enough for a full install.Install Ubuntu without any change to my computer?Dowload it to your computer

    Burn ISO file to disc.

    Insert disc into computer.

    Restart computer.

    You will see a opition for try it without any changes to your computer. You can try it out there.



    If you like it. You can do a dual bootup install that will keep vista on your computer. But once you go linux you'll not want to go back.Install Ubuntu without any change to my computer?you can download ubuntu without change any thinkInstall Ubuntu without any change to my computer?you can do a live cd bootInstall Ubuntu without any change to my computer?i use ubuntu 7.10 from flash live never did like dual booting

    What will change if i install service pack 2 for vista?

    i just got used to my system and downloaded a bunch of new toys... stuff that will make it more fun computing well my question is if i install the new service pack 2 for vista how much will change and what do i need to do before i install it?What will change if i install service pack 2 for vista?The best thing to do is to install service pack 3. It's way better. You shouldn't need to do anything else.



    http://chris-computer-repair.webs.com/What will change if i install service pack 2 for vista?it makes it more stable. at least it did for me. i had 2 programmes that crashed fairly regularly before sp2 and now they haven't at all since sp2.



    i think it's a good thing.What will change if i install service pack 2 for vista?It won't really change anything visible. The changes are mostly fixes. You probably wouldn't notice anything different.What will change if i install service pack 2 for vista?I Think Security of the PC is more Important than %26quot;Goodies%26quot;, All Service Packs are almost Mandatory for PC's, the updates are there to patch hole, flaws, etc., Plus SP2 Helps speed Vista up some... Good LuckWhat will change if i install service pack 2 for vista?Basically, you won't notice you even installed it.



    And it is always best to do a backup before installing anything. Especially something as major as a service pack.
  • at school need women advice
  • hair straightening
  • Okay I going to change my lower ball joint. How much is the labor work to install a new ball joint on a 00 Dur?

    Okay I going to change my lower ball joint. How much is the labor work to install a new ball joint on a 00 Durango? Having a bad ball joint can affect your streering wheel? How do I know if my ball joint is really bad? The wheel dont move it make noise,Okay I going to change my lower ball joint. How much is the labor work to install a new ball joint on a 00 Dur?you should be able to jack your truck off the ground and put a bar under the tire and see if you have any slop in the front end. If You should see the components lift first then you have slop in the front end. If your front end is ok, then when you lift the tire, everything will move in unison.

    If you have problems you might look at your idler arm. Its a problem and you can replace it for a few dollars.Okay I going to change my lower ball joint. How much is the labor work to install a new ball joint on a 00 Dur?cost will vary between shops so call three places will get you a good answer and yes it will make it sway some when driving way to know is jack it up and use a pry bar and lift on tire and look to see if anything moves under at ball joint if its real bad you can shake tire by hand from top to bottom and feel it that way also and if someone check the ball joint and said it was bad then you know and they dont make much noise might pop some when its real bad but really if its bad and wheel fall off when driving you really dont want to know what happens so be smart just cal a few shops ball joint its self about 25 to 50 bucks puting it in might be 200Okay I going to change my lower ball joint. How much is the labor work to install a new ball joint on a 00 Dur?I also own the 2000 Durango, be aware there is a recall for this item.



    Take it to a dealer anywhere, it doesnt have to be the one that it was purchased from, and you dont have to be the original owner either.



    The part and labor will be the resposibility of the dealer.

    If I change out my motherboard, Do I have to have a CD in order to install Windows XP on it?

    If I change out my motherboard, Do I have to have a CD in order to install Windows XP on it? Or will the hard drive install it automatically?If I change out my motherboard, Do I have to have a CD in order to install Windows XP on it?You don't install an operating system on the motherboard. You install it on the primary hard drive. As far as I know, the new 'board should boot up with the current hard drive. You may need to set up the BIOS, though.



    Hope that helps.If I change out my motherboard, Do I have to have a CD in order to install Windows XP on it?When you put a new motherboard in a Computer it doesnt effect what you have on your hard drive. So as long as you didnt format your drive you shouldn't have anything to worrie about.If I change out my motherboard, Do I have to have a CD in order to install Windows XP on it?Your hard drive will support your motherboard ; as XP is already on your HDD. And , your new motherboard will come with a bios CD that you will need to install fron an IDE boot which is where the computer is usually set up as first boot option.Very important is registering your HDD , again. You may want to do the work and take it to your computer guru with a network to get the OS registered ; or you will lose it in short .

    How can I change my static ip to dynamic ip, some say i have to install a dhcp server, im using vista?

    I am using vista, i have a static ip address whenever i turn off my modem. Some say i need to install a DHCP.

    I can see how to change ip address if i am on a dynamic ip but how do i do it with static ip.



    BenHow can I change my static ip to dynamic ip, some say i have to install a dhcp server, im using vista?Internal IP address (the address your PC has on your internal network) can be changed by accessing the router interface. You have to remove the static IP mapping for your PC if you want it dynamic. Routers have inbuilt DHCP servers, but it may be turned off, in which case turn it on (it will be a switch or checkbox somewhere in the router's web interface).



    External IP address (the one seen by any of your PCs when accessing the internet) can only be changed between static/dynamic by your ISP, since they are the ones assigning it to you.How can I change my static ip to dynamic ip, some say i have to install a dhcp server, im using vista?Your IP address is supplied to you by your ISP, if you rather have a dynamic IP you need to call them to change it.

    XP upgrade disk to install OS after motherboard change?

    I'm going to replace my cpu, motherboard, and ram soon. I've heard that when changing motherboards I have to reinstall windows. Can I use my XP upgrade disk to install windows XP? since i did have XP prior to the change.XP upgrade disk to install OS after motherboard change?when you go to install windows it should give you an option to repair the installation



    you can just use that after the new motherboard is installed and it should work just fine



    however, if you haven't re-installed windows in a while it's probably a smart idea to do a clean install



    but yes, as long as there is a install of windows on the hard drive the cd will see that and just go ahead



    also, when the computer says %26quot;Press any key to boot from CD...%26quot; press any key there to boot into the setup (don't do it from windows)

    If i install Ubuntu inside windows will it erase or change anything on my normal windows desktop?

    Im just trying out linux and im liking it alot but i still need my windows XP. If i choose the option to install ubuntu inside windows will it change anything? What does it do after installed? Thanks.If i install Ubuntu inside windows will it erase or change anything on my normal windows desktop?I would not install Linux %26quot;inside Windows%26quot;. Although I've never done it like that I always install it on a seperate partition. Click the %26quot;help me restart%26quot; option and follow the %26quot;Install%26quot; instructions on the Linux side. And no, it doesnt mess with anything in your Windows side. It should install it on a seperate chunk of your hard drive (partition) and you are givin the option to boot into Windows XP or Ubuntu(Linux). So in short the answer is %26quot;No it does not change anything on Windows except adding %26quot;Ubuntu%26quot; under the Add/Remove Programs list.%26quot; But if you uninstall Linux you're left with an unusable chunk of hard drive that was partitioned and will have to use a partitioning program to get it back.If i install Ubuntu inside windows will it erase or change anything on my normal windows desktop?. Ubuntu has made dual boot without disturbing your NTFS partition in Windows absolutely foolproof so you just have to OS on 1 hard drive
  • dating to find
  • cleaning out a
  • How to install or change new Nokia 6101 housing or faceplate?

    I'm planning to buy a new housing/faceplate for my Nokia 6101. My question is... how do you do it? How do you take off the old one?How to install or change new Nokia 6101 housing or faceplate?You can get installation instructions here:

    http://www.88-battery.com/nokia/nokia-61

    How do I change my updates/install to do it automatically when I shut my comp down?

    It says that it's on automatic but I have to prompt it to do it. And I want to change it so that it does it when I shut down but I can't figure out how to do it!!

    Windows XP home..How do I change my updates/install to do it automatically when I shut my comp down?Open control panel then click automatic updates, change it to automatic (reccomended) when there is an updates it will download automatically and install but it will still instruct you to restart computer to take effect the installed updates or during shut down it will appear in the shut down bar. make sure that your using genuine windows.

    How can I change the hard drive my computer will install to by default?

    I use InstallShield wizard,



    How can I change the hard drive where it installs the game files to?



    because the default one it is installing on only have 200mb free



    but my other hard drive has 40gig freeHow can I change the hard drive my computer will install to by default?just navigate to the drive you want to save it to and hit save

    How will I change the default folder icons in XP without having to install any programs?

    I want to change all the folder icons at once in Windows XP but I dont want to install any programs such as Iconpackager, etc. Is it possible?How will I change the default folder icons in XP without having to install any programs?select all the folders what u want to be changed %26gt; right click on them %26gt; properties %26gt; customize %26gt; change icon %26gt; and u can choose any icon from your computerHow will I change the default folder icons in XP without having to install any programs?google free .ico iconsHow will I change the default folder icons in XP without having to install any programs?Guess you have to do it one by one then. I had the same question and found this program http://www.cursorarts.com/ca_aifw.html which worked good for me. (i know you didn't want to install anything but maybe it helps)

    Does the "machine number" of my PC change if I install a new Windows version?

    I have some programs which monitor my %26quot;machine number%26quot; upon registration. I'm installing a new version of Windows. Will my number change?Does the %26quot;machine number%26quot; of my PC change if I install a new Windows version?It will change if you don't set it to be the same as your current one during the installation of windows. You are prompted to enter a machine name but if you choose to just press next you get something fairly random.Does the %26quot;machine number%26quot; of my PC change if I install a new Windows version?no your machine will always be the same, unless you know some funky business, which i'm sure is possible.
  • backgrounds for myspace
  • Is my cat crazy
  • How do I change/install a ATI driver?!?

    Okay my Radeon 9100 (Display Version: 6.14.10.6396)display driver is currently working fine, but I play a game called Counter Strike where it sometimes crashes.



    The support page for the game says that my current driver is the cause of the crashes, and that I need to download and install an updated version (Recommended Driver Version is 8.282).



    I have spent about 2 hours downloading different and various products from ATI.com and it is completely frazzling to have majority of them pop up with the message 'driver is not compatible with your existing hardware or operating system'.



    I need help on how to install the required driver so my game can run smoothly! All advice will be greatly appreciated!How do I change/install a ATI driver?!?You will first need to get into the Add/Remove programs and uninstall it from there first. Then you need to search for any folders that say ATI that are left over from the uninstall. Get into your %26quot;regedit%26quot; as well and hunt down and delete manually anything ATI. After that is taken care of, i'd run CCleaner just to make sure. Goto ATI's homepage and find the most recent driver/ catalyst for your card and OS. Restart your puter after you have downloaded (not installed yet), and then install your download. This should take care of your problem.

    How to adjust or change-remove & install- the throttle cable on yard machine self-propelled walk behind mower?

    For changing, just disconnect at each end, and any clamps that are holding the cable in place. Then route the new cable the same way as the one you took off.

    For adjusting, close the carb throttle plate all the way, position the throttle lever in the slow or off position, and clamp the outer cable in position at the carb

    How can i change the o/s language. When i install the o/s then it install in French language.?

    How can i change the o/s language. When i install the o/s then it install in French language. Can i install it in English language or can i change its language after installing the o/s.

    please tell me solutions soon.

    thanksHow can i change the o/s language. When i install the o/s then it install in French language.?Which OS? Windows Vista? Home Premium? Basic? Ultra?



    Windows XP?



    Mac OS X?



    Linux? Red Hat? Ubuntu?



    Do you want to change the display language, e.g. of the menus etc. or the entire language of everything on the OS? The OS is usually installed as language specific.



    In Vista, you can install additional language packs so that the user interface is in another language, but the administration will still be done in English (or in your case French).



    The CD/ DVD that your OS installation came on is likely to be language-specific.



    From Vista's help center:



    Install a display language



    You can change the language Windows uses to display text in wizards, dialog boxes, menus, and other items in the user interface. Some display languages are installed by default; others require you to install additional language files.



    Before you can install a display language, you need access to the language files. These files can be on your computer, on a computer on your network, or on your Windows DVD; or they can be downloaded from the web. For more information, see How do I get additional language files?



    To install a Language Interface Pack (LIP), double-click the file to open the setup program. To install a Multilingual User Interface Pack (MUI), follow these steps:



    Click to open Regional and Language Options.



    Click the Keyboards and Languages tab.



    Under Display Language, click Install/uninstall languages, and then follow the steps. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.



    Note

    The Display language section will only be visible if you have already installed a LIP or if your edition of Windows supports MUI. MUI packs are only available in Windows Vista Ultimate and Windows Vista Enterprise.



    After you install a display language, you need to set your computer to use that language. For more information, see Change the display language.

    Sony Ericsson K750i - is there something you can install / change to password the keylock?

    I think that makes sense, when I take the keylock off to use the phone, is there something that can be installed / changed settings, so it asks me for a pass code?



    Can't find anything on the net or in the manual if there is, only the sim lock and phone lock which doesn檛 help me with what I want.



    ThanksSony Ericsson K750i - is there something you can install / change to password the keylock?no not for when you are taking the keylock off, you can enter i pin code so when the phone is turned on it asks for you code and the sim lock locks your sim card only to the handset i dont like this option but more phones do seem to having this but that is about it, i reckon it would be a great idea though if the manufactures did thisSony Ericsson K750i - is there something you can install / change to password the keylock?actually if it was text meassges you were wanting to lock there are mobiles that i think you can do that with though i am not 100% sure if you were to ask in a retail shop they would probably be able to tell you if that helps at all :)

    Report Abuse

    What do i need to change in my car to install a turbocharger?

    i heard from someone that i need to change the manifolds, and body throttle to install a turbo on my stock car.... can someone please tell me if this is true, and i wanna know if the turbo could be harmful to the car. thxWhat do i need to change in my car to install a turbocharger?It's not as simple as just slapping on a turbo and having a turbo charged car. First, you need to find out where it's going to fit. Then you have to figure out how to cool it, since most require some means of cooling off, and you'll need to protect everything around it. Also, you will need to change your exhaust manifolds as well as your entire intake system, not just your throttle body.



    In reality, you should go inside and reinforce the engine. A turbo will change the compression within the engine to a level that your engine and it's components were not meant to see, especially since this is stock....gaskets, valves, cam, etc.



    I assume you think you're going to race this thing or something, or just want a faster car? Skip the trurbo. If you're asking automotive tech questions like that on Answers, then you have no idea what you're doing under the hood. I don't mean to be offensive, I'm just trying to save you a buck and the hassle of blowing up your engine for something like this.



    A turbo isn't just some cheap modification like a K%26amp;N intake or a more open exhaust (both of which I'd suggest well before a turbo) and isn't typically a bolt-on application. Start with the airflow...like I said, an intake and exhaust. Then, reprogram the computer if you can, and tinker with some of the factory settings. After that, the rest of your changes will likely be internal. You can't just throw gobs of horsepower at a stock engine and expect it to hold.





    Ultimately...give up the turbo idea.What do i need to change in my car to install a turbocharger?Depends on the car. You will have to change your exhaust and intake systems no matter what though. As for having the specifically change the manifolds it will greatly depend on where you install the turbo. Throttle body shouldn't have to be touched though.What do i need to change in my car to install a turbocharger?Please specify the car!What do i need to change in my car to install a turbocharger?your car.What do i need to change in my car to install a turbocharger?best if you could change,

    1. cylinder head ( make sure you fit the correct gasket for the head-non turbo ones are different *take note)

    2. manifold (both inlet and exhaust)

    3. fuel injectors

    4. for best results, pistons (coz non turbo piston is higher), and normally you must wire an air flow controller unit to adjust the air and fuel for best result.



    hope it helps, Merry Christmas.
  • no clue how to use it
  • How often should I change my pillows
  • Allow users to change time and install software?

    Allow users to change time and install software

    I have a user that can't change their time or install software unless they are Administrator in Windows XP. IAllow users to change time and install software?Administrator in Windows XP is there to protect from malice user. One must protect one檚 property if you understand my meaning. One cannot authorize others to do it. So sorry cannot help you

    How do you change or install the air cabin filter in a Hyundai Veracruz?

    Just remove the glove box and you will find a window on the heater box. remove the cover and you will see the cabin air filter. pull it out and follow reverse procedure of removal.How do you change or install the air cabin filter in a Hyundai Veracruz?Drop the glove box down by pushing in the sides of it so the stops clear then do as stated above.

    If I install Windows XP SP3, will it change/ install Movie Maker again, or make any changes to it?

    My movie maker right now is 2.0 and it has this problem, and i have windows xp sp2. So if i install xp sp3, will it correct the problem or will it make a change on movie maker?If I install Windows XP SP3, will it change/ install Movie Maker again, or make any changes to it?Doubt it very much but then again what have you got to lose as security updates such as SP3 help keep the virus wolf from the door.If I install Windows XP SP3, will it change/ install Movie Maker again, or make any changes to it?It may. Microsoft seems to group all of their OS fixes into one service pack lately.If I install Windows XP SP3, will it change/ install Movie Maker again, or make any changes to it?hi systri, window xp sp3 is still windows xp by any other name so no it will not definitly not. so if it is service pack two or service pack 1 windows xp is windows xp. but now if you were going with vista than yes you would have to update your software and i found that out when i upgraded to vista. all service packs is more security or an add on to the service pack that you already had downloaded but while we are on this subject let me tell you what i read about service packs when this copy of windows came out which there is a lot of them people was complaining now they have their own people that just does nothing but stays on the computer all day long a part of quality control so they test it and find that the complaint is sound so they come out with another service pack that can correct these issues. but they are still windows xp just a different service pack. hope i explained that good enough and i wish you good luck hope i was helpful to you

    How do you change/install a sound card?

    The sound card is located on your motherboard, in a PCI slot. Uninstall the old drivers before you start. Shut the computer down, open one of the side panels up, and gently wiggly sound card out, side to side. It will probably be held onto the computer's case with a small screw. Undo that first.



    Before you work on computers, make sure you wash your hands and touch something metal - this will get rid of static electricity from your hands which could be discharged into the computer's components, damaging them.



    Then stick the new sound card in, making sure it's in all the way, and finally, screw the bracked into the computer's case. Then, boot the computer up and install the new card's drivers.

    How do i change the install things on my mac to my external hardrive?

    i dont have much gb in my macintosh HD left, so i when i install stuff i want it to go and install in my external hardriveHow do i change the install things on my mac to my external hardrive?change the root to your mac drive in windows it is C:\ I dont know about macsHow do i change the install things on my mac to my external hardrive?The installer usually prompts for the install location. Just select the external drive. Some system files have to reside on the system drive, though. You should consider clearing out some space on the system drive, or upgrade it to a larger one.
  • hardware support
  • tvs
  • How do u change or install the brake lights of a 1999 Chevrolet Suburban?

    Can u tell how to. OR tell me a website where I can find this information.How do u change or install the brake lights of a 1999 Chevrolet Suburban?easy...open the hath or barn doors in the back..there are 2 bolts i believe they are 10mm make sure you use a magnetic socket they get lost very easily...take it out and pop the lights out and then take out the circut board then change the bulbs you need out...put the lense back in and bolt them back up doneHow do u change or install the brake lights of a 1999 Chevrolet Suburban?Open the back doors and there should be 2 screws (I think). then the lense will come loose with some wiggling.How do u change or install the brake lights of a 1999 Chevrolet Suburban?You will need to open the back doors to get to the screws that hold the lights in place. The panel that has the door hinges on it will also have the two screws that hold the light in place ,just remove the two screws ,then wiggle the light until it come 's free so you can get to the back side of the light.. now you will need to remove the black plastic cover in order to get to the light bulbs, i believe there three screws holding it in place.Now that you have replaced the burnt out bulb/or bulbs you will need to put the left side of the light in first then the side on the light with the screw holds in it next so it pops back into place ,then replace the screws.

    How do change firewall settings to install yahoo messenger ?

    I keep getting the error message that says, Unable to install yahoo messenger. Please change firewall settings and try again.



    I had messenger for years, Dont know what happend, but not it wont on my computer, I have tried every version from 4.0-9.0



    any ideas?



    thank you How do change firewall settings to install yahoo messenger ?You may not have to change firewall settings . Try this first.....



    If you are trying to use Version 9.0, it has too many problems. This is what I recommend:



    First you have to uninstall the 9.0 version, or any other version you have. Go to CONTROL PANEL----than go to PROGRAMS/FEATURES, or ADD/REMOVE PROGRAMS. Scroll down till you see YAHOO MESSENGER. Click on it and than click UNINSTALL. Use this link below that I provided to install:



    http://download.yahoo.com/dl/msgr8/us/ym



    Good Luck :)

    How do change firewall settings to install yahoo messenger ?This problem can be done in one click. It is much more easier and simple to you. Follow me by:

    1/Open Internet explorer

    2/Choose %26quot;Tool%26quot;, then select %26quot;Internet Option%26quot; at the bottom.

    3/ Go to the last tab named %26quot;Advanced%26quot; and click on %26quot;Reset%26quot; button at the bottom.

    4/ Done. Try to open internet site

    Report Abuse

    How do I change a default install location for a PC game before I install it (CFS 3)?

    This probably doesn't matter but if you know what to do please help



    I installed CFS3 about a month ago, and recently I tried installing the ETO expansion pack, but but my computer won't let me modify the batch files so I am unable to run the program without switching eras, so is there a way to change the default install path of the GAME so I don't have to modify the batch filesHow do I change a default install location for a PC game before I install it (CFS 3)?Since you did it to me, I guess I can do it to you too, right?

    You know, where you ask a question and I'll respond to it with something that has virtually no relation to the topic you were discussing.



    You left me a slightly rude message the other day for a question I asked. I don't care for your opinion, and seeing as you don't know me, I think you spoke entirely out of turn.



    Now I bet you're thinking, why is she coming onto my board starting something, but in a way, I'm just doing to you, what you did to me.



    So why? Why did you waste your time answering my question with something rude and uneducated. You're highly judgmental, and life's too short to be that way. Since you didn't answer my question, nor did you attempt to, and I doubt you even planned to at all, why did you click on the link?



    Lack of anything better to do? Or did you just want to start an argument? Maybe you just don't have anyone or anything to occupy your time with, and that's why you sit here, reading things that clearly don't even interest you. Because everybody else took me seriously, and you didn't. Guess you wanted to let people know, huh? Well, it doesn't make you cool.



    Maybe you should be nicer on here. I saw you don't have any fans.

    Maybe you should be a better person.



    Maybe you should use this site for what it's intended to be used for.



    Please, remember for next time, if you're not answering a question, don't click on the link. Because you're just wasting my time, and making yourself look stupid, and you seem smart, so why put yourself through that? I think you know what this site is used for. Neither I, or anyone else, should have to explain it to you.

    How to change install directory?

    i just bought a game stronghold crusader extreme, and i cant play it because when i intall extreme, it puts it under localdisk/windows, and it mixes with every other file. is there a way to change where it installs? and whenever i try to uninstall it, it just reinstalls itHow to change install directory?Hi there,



    Well I hope that you uninstall it from the Control Panel- Add/Remove Programs. Usually that uninstalls it unless if in the uninstall wizard you somehow selected repair or some other option. Once the game is on your computer I don`t believe that you can change it`s location. If you uninstall and then re-install, you should be able to change the directory of where you can find your game. For instance most install wizards begin by asking if you agree or not with the User License. After that there should be a step where you are shown where the game is being installed. Usually it檚 something along the lines of C:\windows\games\gameName or what ever. Next to this or below it there should be a button where it says %26quot;Change Dir%26quot; or just %26quot;Change%26quot;. Click on it and then type the name of the folder where you want to install the game. I usualy use C:\games\gameName. Once you do that click ok and if a pop up window appears saying %26quot;folder does not exist... Doyou whish to create it?%26quot; click yes or ok. Follow the rest of the installation process and you`re done.How to change install directory?When you're installing software, no matter what it is, it generally gives you the option of where to install it to. Try uninstalling, and watch each and every step it goes through.How to change install directory?Have you tried uninstalling it using the Add/Remove programs in My Computer? Or if you have downloaded it with a download manger, is it still on the projects list? You have directed it on a wrong intallation path, but maybe if its setup is still there as a separate icon, you can hopefully redirect its path, using the Browse option.You can try finding the game's intallation setup in My Documents, if so try right clicking it, then choose Delete.

    How can I change the install directory of a program?

    Well I recently purchased a solid state drive, and have a 1TB HDD that I use to install my programs on. However, some programs do not allow me to chose the directory. How can I move them over and keep them properly working?How can I change the install directory of a program?Try installing to the Desktop.



    When done and tested, create a folder, like C:\Foo

    (Use Windows or DOS commands)

    (Foo is an example folder name)



    Then Drag %26amp; Drop the files from the Desktop to the Foo folder.

    ;-)



    Or...

    (Using DOS from the Command screen)

    CD \ (puts you in the main or root folder, Desktop) (don't forget the backslash)

    MD Foo2 (Creates the Foo2 folder, MD, Make Directory or Folder)

    Copy \Foo *.* C:\Foo2 (*.* means everything before the period and everything after the period, leave a space after the first *).



    You now have copied the files in Foo to Foo2



    If all OK, you can delete the files in Foo and then delete the Foo folder.



    If I'm talkin' Chinese, forget it.

    Learn some DOS instead.



    To learn some DOS, from the Command screen, type %26quot;Help/?%26quot; (no quotes).

    ;-)How can I change the install directory of a program?You can't.How can I change the install directory of a program?If a program does not allow you to change the install directory, the you cannot change it.



    By default many programs install themselves in the Windows Drive or C:\Program Files\...

    So what you can do is install Windows on your new hard-disk and make the machine boot out of it. This will in turn make those program install them on it. But the flip side is that they will be deleted in case you format the disk or re-install your OS.
  • single beds
  • married advice for
  • Install, or change things on a windows that is installed on an external harddrive?

    my friend lend me his C:// external harddrive from his desktop computer to let me change his resolution and try to install things on it, rite now i have it connected to my laptop but im using MY window, can i be able to change or install things in his windows when im using my windows? or i need to boot to his window to do it?Install, or change things on a windows that is installed on an external harddrive?Yes to make changes you will need to boot to his Window and further you can make the changes easily.

    How to install/change the thermostat on a 1994 Toyota Pickup?

    Hi, does any body know how to install/change the thermostat on a 1994 Toyota Pickup DX Xtra Cab, 4-Cyl. 2.4 Liter , 5 Speed Manual, 2WD?How to install/change the thermostat on a 1994 Toyota Pickup?take the top radiator hose lose at the motor, now pull that cap off(the one that the hose was hooked to),2 bolts, that's where the thermostat is, clean the old gasket off and carefully install the new thermostat with the long side down or in,, do not over tighten your bolts when you put it back together,How to install/change the thermostat on a 1994 Toyota Pickup?It will be on the engine side of the top radiator hose. Make sure to clean all old gasket material off. The spring side of the thermostat goes toward the engine.How to install/change the thermostat on a 1994 Toyota Pickup?good buy AmericanHow to install/change the thermostat on a 1994 Toyota Pickup?easy one to do, locate it first, follow the 3 inch radiator hose from the top of the radiator to the top of the engine and it should be where this hose connects to the engine, Two bolts to remove-remove them, gently tap the little housing with a piece of wood or wedge a screwdriver between the block and 4-5 inch housing and pop it up,

    .clean and scrap off the surfaces that touch each other, install new thermostat with the proper side down, just as the old one came out, apply gasket sealer to the gasket and block. put the little housing on and turn in the two bolts, do not over tighten



    (some thermostats have a design with a different gasket, a rubber one that needs no sealer, check when you remove)



    after tightening the bolts, add antifreeze, leave cap off, start it up and wait until the level drops down, add more to fill, then close cap. Run engine or drive, next day fine too, third day before starting it up, open cap to recheck antifreeze level, add and apply cap.

    Can someone tell me how to change/install a new top radiator hose snout ?

    I have a 1997 Ford F350 7.3 turbo diesel engine. Can anyone tell me how to change or install a new top radiator hose snout with square o ring on the top of thermostat ? ThanksCan someone tell me how to change/install a new top radiator hose snout ?Radiator repair should be done at a radiator repair shop

    it is not a easy job.Can someone tell me how to change/install a new top radiator hose snout ?go to auto zone buy the hose and a gal of antifreeze, go hone let the car cool off pop the hood get a flat head screwdriver turn the screw on the clamp at the end of each hose until the clamp slides down the hose some of them don't slide but get it lose than grab the hose close to the radiator pull it off than pull it off of the motor throw it away and slide the new hose onto the motor tighten down the hose clamp than place the hose and clamp onto the radiator side tighten down the clamp than open your radiator cap poor in some antifreeze put the cap on drive the car until the temp gets to norm running temp make Shure it is not leaking and you are done

    How do you change/install a theme on a tmobile wing?

    How do you change/install a theme on a tmobile wing? I downloaded some more themes just dont know how to install themHow do you change/install a theme on a tmobile wing?use file explorer

    move it to the windows file

    it has to be under windows

    once it is there click start/settings/today

    it should be listed in options so you can select it thenHow do you change/install a theme on a tmobile wing?HOW DO YOU DOWNLOAD THEME TO THE PHONE????? THAT WHAT I CANT DO, I KNOW HOW TO CHANGE THE THEMES FROM THE PHONE BUT NO CLUE HOW TO DOWNLOAD THEM, SO IF YOU GUYS CAN HELP LET ME KNO

    Report Abuse

    How can you change install paths in exe files?

    I have an exe file (test drive mega pack exe) and its not finding the test drive folder as i havent installed to C:\Program Files , is there any way or anything to change the exe to install to another folder?How can you change install paths in exe files?USE AT YOUR OWN RISK



    You need to modify Windows Environment Variables, in your case the PATH variable that contains the list of folders that Windows searches when you try to run a program by entering its name. To be able to modify this variable you must be an administrator



    As an administrator, follow these steps:

    ? Select START %26gt; RUN or press and hold the WINKEY + R

    ? On the run dialog-box, type sysdm.cpl and click OK

    ? On the System Properties dialog box, click the ADVANCED tab, then click on the ENVIRONMENT VARIABLES button at the bottom

    ? On the Environment Variable dialog-box, go to the System variables section and scroll down to locate the PATH variable.

    ? Select the PATH variable and click the EDIT button.

    ? BEWARE DONT DELETE ANYTHING REMEMBER YOU WANT TO ADD

    At the end of the VARIABLE VALUE, add a semicolon (“;”) after the last entry (like the old values have), and then enter the new folder location, example F:\DiskMgm\Knot\Proy

    ? Click the OK button to apply your modification

    ? Click OK to close the environment variable and system properties dialog box



    That is all, your change has been applied
  • howdoyoumakeyourcomputerfaster
  • powder coat bmx frame
  •